Enjoy up to 30% DISCOUNT

Instructions Tattoo Spray

How to use temporary tattoo spray

Slowly peel off the tattoo stencil, position and firmly apply on clean and dry skin.


Shake can for a minimum of 20 seconds and frequently during use.



 First test the spray on a piece of paper. Then spray on skin in short bursts for not longer than 2 seconds from a minimum distance of 10-15 cm. Avoid over-spraying. May need more than one coat to achieve desired effect. Allow each layer to dry for about 10 seconds before applying the next one. Avoid face and eyes, irritated skin and sensitive body parts. Repeat two or three times for more colour intensity. Always spray from the same direction.



When dry carefully remove stencil & replace stencil back onto the backing paper for future use.


Always make a skin sensitivity test before every use by applying a small amount of colour on the inside of your arm. Should a skin reaction appear within 1 hour do not use the product. Protect clothing and surrounding materials from over spray; product may stain. Avoid rubbing tattoo when washing, dab with towel to protect finish. Do not use cream or lotion on the tattoo.


Remove tattoo using either alcohol wipe or a cloth with warm soapy water. Store & use at room temperature.




Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50oC /120oF. Do not pierce or burn, even after use.


Do not spray on a naked flame or any incandescent materials. Keep away from sources of ignition – No smoking. Keep out of the reach of children. Do not use excessive or improper amounts of the product. Avoid contact with the eyes and mucous membranes, do not apply to irritated areas.


If the product comes into contact with the eyes, rinse well with water. Keep container in a well-ventilated place. Do not breathe spray. Take precautionary measures against static discharges. Use only in well-ventilated areas.


Cosmetic product for external use.


 Video instructions for tattoo spray